Bmb-home HOME PROTECTOR+ Guide de l'utilisateur télécharger pdf (Page 11)

28-6-2011 11 033000=13069F

3. Installing remote controls

3.1 Key Chain Remote Control KR18

1. Control indicator

Comes on when the remote control sends a radio signal when keys are pressed. When the

indicator blinks only weakly, the batteries have to be replaced.

2. Arm

Switches on the Security System in the Arm Away Mode. All sensors are activated.

3. Disarm

Switches off the Security System.

4. A On / Off

Switches on / off the lights connected to the Lamp Module set to the Home Automation Base

Address.

5. B On / Off

Switches on / off the lights connected to the Lamp Module set to the Home Automation Base

Address +1.

6/7. Panic

When both keys ARM (2) and DISARM (3) are pressed simultaneously, an immediate alarm is

initiated by the Security System.

8. Battery holder

The back of the remote can easily be opened by taking the two parts apart. Use 2xCR2016,

3V lithium batteries.

3.1.1 Using the Key Chain Remote Control

1.) Batteries

A new KR18 contains batteries for default.

2.) Initializing the KR18

Press the ARM key for more than 3 seconds and release the button; the indicator blinks.

Release the button. The remote control has now chosen a unique code, which can be

registered with your console.

When pressing the ARM button the LED should flash quickly a few times. When the LED lights

up and stays lit, you need to re-initialize the KR18

3.1.2 Registering the Key Chain Remote Control with the Console

1. To access the menu, press either the menu UP or DOWN button. The display now shows

ENTER PIN.

2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). The

display is cleared and shows a * for each number entered.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 187 188

Bmb-home HOME PROTECTOR+ Guide de l'utilisateur Page 11